Advertisements

Home » Technologies and Materials » Powder Metallurgy

Powder Metallurgy

DORST Cross-Pressing Modules – X-pressTechnology for Near Net-Shape Powder Pressing

As far back as in 2005, DORST Technologies equipped the first axial powder press worldwide withsix servo-motorized cross-pressing modules – a development that would enable near net-shape pressingof entirely new...

IWM-IAPK Colloquium 2017: Sintering as a Future Technology – Opportunities and Challenges

On 16.03.2017, at the Technology Centre on Europaplatz, in Aachen/ DE, the IWM-IAPK Colloquium was held under the heading “Sintering as a Future Technology – Opportunities and Challenges”. In his...

Lauffer E-Line – Highest Precision and IoT Connectivity

Since mid-2020, Lauffer/DE has been widening its product portfolio with the addition of servo-electric presses of the E-Line generation. Key feature of these E-Line presses is their excellent performance in...

Powder Metallurgy – Key Technology for Innovative System Solutions

The 38th Hagen Symposium was held from 28.–29.11.2019, with more than 190 attendees from 11 nations in Stadthalle Hagen, Germany. The accompanying exhibition was arranged by 54 companies. Speakers from...

Powder Metallurgy – New Challenges and New Paths

Digitalization in production technology concerns all areas of industry and will also significantly influence the further development of powder metallurgy. Behind the terms Industry 4.0 or digital, additive production are...

Servo-Motorized Multi-Platen Press EP16 M Ultra-Digital

The new DORST Technologies EP16 M servo-motorized uniaxial powder press with an additional press level at the bottom opens up new possibilities for producing staged parts from metal powder, technical...

High-Throughput Serial Production Line for Hot Pressing of Large Area Ceramic Components

Certain ceramic or powder metallic parts are made by pressure-assisted sintering methods, e.g. hot pressing. In the last decade, it was possible to increase the cost-efficiency of these methods significantly...

Isostatic Press PI60/4 – the Next Generation

After a fundamental revision and diligent model care, DORST Technologies/DE presents the next generation of the proven, dry isostatic universal powder press PI60/4 for the production of rods, shafts, tubes,...

Future of PM Components – Attempted Forecast on Materials, Processes and Markets*

In mobility today, i.e. for cars, lorries, aeroplanes, motorcycles, electric bicycles, trains, buses and public transport, all vehicles, apart from a large number of railway vehicles and a small number...

CREMER High-Temperature Continuous Pusher Type Furnace

CREMER Thermoprozessanlagen GmbH/DE has developed a high-temperature pusher type furnace with which the upper limits of carburization processing temperatures are challenged. During the course of a EU-sponsored project, CARBIDE2500, demonstration...